gap pad ? 2202sf is a high performance, 2.0 w/m-k, thermally conductive gap flling material. the gap pad ? 2202sf compound is silicone-free by design and offers exceptionally low interfacial resistances to adjacent surfaces. gap pad ? 2202sf is specifcally designed for silicone-sensitive applications. the materials construction features a 0.5 mil pet flm on one side and natural tack on the other. the natural tack eliminates the need for an additional adhesive layer. note: to build a part number, visit our website at www.bergquistcompany.com. gap pad ? 2202sf typical applications include ? hard drives ? optical applications ? set top boxes configurations available ? sheet form ? we produce thousands of specials. tooling charges vary depending on tolerances and complexity of the part. ? custom thicknesses available upon request construction pds_gp_2202sf_0814 features and benefits ? thermal conductivity: 2.0 w/m-k ? silicone-free formulation ? minimal compression set ? 0.5 mil flm provides tack-free surface ? tacky side allows for ease of handling and placement product description silicone-free formulation, high performance thermally conductive material august 2014 property imperial value metric value test method color gray gray visual reinforcement carrier 0.5 mil pet film 0.5 mil pet film ? thickness (inch) / (mm) 0.010 to 0.125 0.254 to 3.175 astm d374 inherent surface tack (1or 2 sided) 1 1 ? density (g/cc) 2.8 2.8 astm d792 hardness (bulk rubber) (shore 00) 1 70 70 astm d2240 continuous use temp (f) / (c) -40 to 257 -40 to 125 ? electrical dielectric constant (1000 hz) 6.0 6.0 astm d150 volume resistivity (ohm-meter) 10 11 10 11 astm d257 flame rating v-o v-o u.l. 94 thermal thermal conductivity (w/m-k) 2 2.0 2.0 astm d5470 3 1) thirty second delay value at 250 mil, 23oc. 2)this is the measured thermal conductivity of the gap pad compound. 3) the astm d5470 text fixture was used. the recorded value includes interfacial thermal resistance. these values are given to the customer for ref- erence only. actual application performance is directly related to the surface roughness, flatness and pressure applied. typical properties of gap pad 2202s f overall thickness naturally tacky gap pad 3.0 mil carrier liner, (remove before use) 0.5 mil pet film (do not remove)
for the most direct access to local sales and technical support visit: www.bergquistcompany.com americas +1.800.347.4572 europe +31.35.5380684 asia +852.2690.9296 tds gap pad ? 2202sf, august 2014 disclaimer note: the information provided in this technical data sheet (tds) including the recommendations for use and application of the product are based on our k n o w l e d g e a n d e x p e r i e n c e o f t h e p r o d u c t a s a t t h e d a t e o f t h i s t d s . t h e p r o d u c t can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. we strongly recommend that you carry out your own prior trials to confrm such suitability of our product. any liability in respect of the information in the technical data sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. i n case products are delivered by henkel belgium nv, henkel electronic materials nv, henkel nederland bv, henkel technologies france sas and henkel france sa please additionally note the following: in case henkel would be nevertheless held liable, on whatever legal ground, henkels liability will in no event exceed the amount of the concerned delivery. in case products are delivered by henkel colombiana, s.a.s. the following disclaimer is applicable: the information provided in this technical data sheet (tds) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this tds. henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. we strongly recommend that you carry out your own prior trials to confrm such suitability of our product. any liability in respect of the information in the technical data sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. in case products are delivered by henkel corporation, resin technology group, inc., or henkel canada corporation, the following disclaimer is applicable: the data contained herein are furnished for information only and are believed to be reliable. we cannot assume responsibility for the results obtained by others over whose methods we have no control. it is the users responsibility to determine suitability for the users purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. in light of the foregoing, henkel corporation specifcally disclaims all warranties expressed or implied, including warranties of m e r c h a n t a b i l i t y o r f t n e s s f o r a p a r t i c u l a r p u r p o s e , a r i s i n g f r o m s a l e o r u s e of henkel corporations products. henkel corporation specifcally disclaims any liability for consequential or incidental damages of any kind, including lost profts. the discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any henkel corporation patents that may cover such processes or compositions. we recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. this product may be covered by one or more united states or foreign patents or patent applications. trademark usage except as otherwise noted, all trademarks in this document are trademarks of henkel corporation in the u.s. and elsewhere. ? denotes a trademark registered in the u.s. patent and trademark offce reference 0.1
|
